Martin P3 PowerPort 2000(P3 パワーポート 2000)

商品詳細

概要

The Martin P3 PowerPort 2000 delivers seamless power and data to Martin’s Creative LED fixtures and is applicable for indoor-only install and rental applications. It merges stable power delivery with high-speed, high-capacity data distribution, simplifying fixture deployment. The housing caters to rack-, truss- and wall-installation, for maximum deployment flexibility.

To ensure utmost flexibility for designers and integrators, it can be driven using industry standard protocols, including Art-Net and sACN as well as Martin’s award-winning P3 control protocol. It requires no local configuration or setup, enabling easy deployment and allowing power supplies to be located at significant distances from the lighting fixtures. It supports longer cables, more fixtures per daisy chain, and split branches. The built-in network switch eliminates the need for third-party switches, and power limiting control increases the number of fixtures per daisy-chain while implementing energy-saving measures.

The P3 PowerPort 2000 is a robust and reliable solution, as it protects all inputs and outputs against overload and surge conditions and built-in fail-safe bypass technology prevents single unit failures from disrupting the entire network. In addition, it is a single unit that provides data and power over a single cable to the fixtures. Furthermore, it features local status indication LEDs and a test button, eliminating the need for a person to be physically located at the controller or computer.

All P3 PowerPort-enabled Creative LED fixtures can be paired with the P3 PowerPort 2000, even on the same daisy-chain.
Indoor-only power+data supply unit for all Martin Creative LED fixtures
Suitable for rental and install applications
Features 4 power+data outputs for connection of fixtures
Built-in network switch for easy daisy-chaining
Status LEDs providing real-time feedback
Local test button for easy diagnostics
Built-in power-control enables more fixtures per daisy-chain when full output is not needed
Built-in Hibernation mode enables energy-saving when system not in use
Compatible with Art-Net, sACN and Martin P3
Fitted with connectors for easy deployment
Can be rack-, truss- or wall-mounted


特徴

Indoor-only power+data supply unit for all Martin Creative LED fixtures
Suitable for rental and install applications
Features 4 power+data outputs for connection of fixtures
Built-in network switch for easy daisy-chaining
Status LEDs providing real-time feedback
Local test button for easy diagnostics
Built-in power-control enables more fixtures per daisy-chain when full output is not needed
Built-in Hibernation mode enables energy-saving when system not in use
Compatible with Art-Net, sACN and Martin P3
Fitted with connectors for easy deployment
Can be rack-, truss- or wall-mounted

Martin P3 PowerPort solutions are ideal for system Integrators building a system containing Martin Creative LED fixtures, rental companies creating a fleet of fixtures and supporting infrastructure to cover a wide variety of applications, and installation customers complementing their fixture-installation with the needed supporting infrastructure.

仕様

Control and Programming
Control Protocols: P3, sACN, Art-Net and RDM over Art-Net
Protocol Detection: Automatic
Settings and Feedback: P3 or RDM over Art-Net
Unit identification: User-settable ID number
Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance: ANSI E1.31 - 2018
Martin P3 Compliance: P3 System Controller Software 6.1.0 or newer
Ethernet Transceiver IN: 100/1000Mbit (with fail-safe bypass to Ethernet THRU)
Ethernet Transceiver THRU: 100/1000Mbit (with fail-safe bypass to Ethernet IN)
Ethernet Transceiver OUT 1-4: 100Mbit
Firmware Update: via Ethernet using Martin Companion or P3 System Controller

Control/User Interface Frontpanel
Power Out Status 1-4: 4x Green LED
Ethernet Out Status 1-4: 4x Amber LED
Ethernet In/Thru Status 1-2: 2x Green+Amber LED
Device Status: 1x RGB LED
Device test and reset: Pushbutton to call up test patterns on fixtures connected to DCE outputs and reset device

Control/User Interface Backpanel
Fixtures Power Mode: DIP switch to force all connected fixtures in normal power, force all connected fixtures in half power or let controller decide (via P3 or RDM)
Frontpanel Disable: DIP switch to disable all (11) Status LEDs and the pushbutton on the frontpanel

Construction
Color: Matte Black
Housing Material: Steel/Aluminium
Protection Rating: IP 20

Installation
Orientation: Any
19-inch Rackmount: Using supplied rack mounting ears
Wallmount: Using supplied rack mounting ears
Trussmount Horizontal: Using halfcouplers in supplied rack mounting ears
Location: indoor or outdoor protected from elements

Connections
Power In: Neutrik powerCON TRUE1
Ethernet In/Thru: 2x Neutrik etherCON
DC Power and Network output: 4x chassis-mount DCE hybrid connector (7pin)
All connections hot plugging compatible

Output Ports
Quantity: 4
Power at 208-240V AC input: 48 VDC / 10 A per port
Power at 100-120V AC input: 48 VDC / 6.8 A per port
Ethernet: 100Mbit (P3, sACN, Art-Net)

Electrical
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 11.9 A
Typical earth-leakage current: 2.20 mA
Power Factor: 0.99 @ 100 V / 120 V / 208 V , 0.98 @ 230 V / 240 V
Max current draw: 17.0 A @ 100 V / 120 V , 12.0 A @ 208 V / 230 V / 240 V
Typical current draw: 16.0 A @ 100 V / 120 V , 10.0 A @ 208 V / 230 V / 240 V *
Power Consumption at 208-240V AC input
Maximum: 2016 W
Typical: 2000 W *
Idle: 34 W *
Hibernation: 24 W *
Power Consumption at 100-120V AC input
Maximum: 1310 W
Typical: 1310 W *
Idle: 37 W *
Hibernation: 20 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: all outputs at full capacity with all connected fixtures at full output white.
Idle: all outputs at full capacity with all connected fixtures at zero output.
Hibernation: all outputs disabled; wake-up procedure required to re-use fixtures.

Thermal
Cooling: Forced air (temperature-controlled fans)
Maximum Ambient Temperature (Ta max): 40° C
Minimum Ambient Temperature (Ta min): -20° C
Maximum Surface Temperature, steady state, at 40° C ambient: 62° C
Typical Heat Dissipation (calculated, +/- 10%): 761 BTU/hr.

Acoustic Data
Sound Pressure Level (LpA) @ 1 m (typical): 57.7 dB(A)
Sound Pressure Level (LpA) @ 1 m (idle): 43.5 dB(A)

Environmental
RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
FSC: Certified cardboard inlay and outer packaging
Approvals
Global CB Certification/IECEE: IEC 62368-1
EU safety: EN 62368-1
EU EMC: EN 55032, EN55035, EN 61000-3-2, EN 61000-3-3
US safety: UL 62368-1
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 62368-1
Canadian EMC: ICES-003 Class B
Australia/NZ: RCM
United Kingdom: UKCA
Compatible Fixtures
VDO Sceptron XB
Exterior Dot-1 Pro (via Exterior DC-Feeder)
Exterior Dot-4 Pro (via Exterior DC-Feeder)
Exterior Dot-9 Pro (via Exterior DC-Feeder)
Exterior Dot-HP Pro

Included Items
1x Multi-Language Safety & Installation Manual
1x Safety Cable Attachment Eyelet, incl. screws
2x Rack Mounting Ears (usable for rack-, wall- and clamp-mounting), incl. screws

Related Items
P3 PowerPort 500 IP Rental: P/N MAR-90721201
P3 PowerPort 500 IP Install: P/N MAR-90721202
DCE PSU 240 IP: P/N MAR-90721203
DCE DataSplitterBooster IP: P/N MAR-90721204

Martin Companion Firmware Upload, Addressing and Stand-Alone Programming Software: Free download from www.martin.com

P3-175 System Controller: P/N MAR-90721100
P3-275 System Controller: P/N MAR-90721101
P3-PC System Controller: Free download from www.martin.com

Accessories
AC Power Input Cables
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m P/N 91611797
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m P/N 91610173

AC Power Connectors
Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU

Pre-Assembled Hybrid DCE Cables
DC + Ethernet Cable DCE-DCE 1m: P/N MAR-91700100
DC + Ethernet Cable DCE-DCE 2.5m: P/N MAR-91700101
DC + Ethernet Cable DCE-DCE 5m: P/N MAR-91700102
DC + Ethernet Cable DCE-DCE 10m: P/N MAR-91700103
DC + Ethernet Cable DCE-DCE 25m: P/N MAR-91700104

Bulk Hybrid DCE Cables
DC + Ethernet Cable 100m: P/N MAR-91700105
DC + Ethernet Cable LSZH 100m: P/N MAR-91700106

Field-Installable DCE Connectors
Field-installable Connector DCE Male: P/N MAR-91700107
Field-installable Connector DCE Female: P/N MAR-91700108

Closing Caps for DCE Connectors
Closing Cap Male DCE Connector: P/N MAR-91700109
Closing Cap Female DCE Connector: P/N MAR-91700110

Hybrid DCE Adapters
DC + Ethernet Adapter DCE Male-Male: P/N MAR-91700111
DC + Ethernet Adapter DCE Female-Female: P/N MAR-91700112
DC + Ethernet Adapter EtherCON+Wires to DCE: P/N MAR-91700113
DC + Ethernet Adapter DCE to EtherCON: P/N MAR-91700114

Rigging Accessories
Super Lightweight Half Coupler Rigging Clamp, black: P/N 91602018
G-clamp (suspension with unit hanging downwards only): P/N 91602003
Half-coupler Clamp: P/N 91602005
Quick Trigger Clamp (suspension with unit hanging downwards only): P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information
P3 PowerPort 2000: P/N MAR-90721200

サイズ

Width: 482.6 mm (19” rack-mountable with included rackmount ears)
Height: 44.45 mm (rackmount 1U)
Depth: 375.0 mm
Weight: 6.8 kg

■メーカーサイト
https://www.martin.com/en/products/p3-powerport-2000