Martin P3 PowerPort 500 IP Rental(パワーポート 500 IP レンタル),電飾,Martin(マーチン),

受付時間 10:00-18:00(定休日:土日祝)
Martin P3 PowerPort 500 IP Rental(パワーポート 500 IP レンタル)
商品詳細
概要
The Martin P3 PowerPort 500 IP Rental delivers seamless power and data to Martin’s Creative LED fixtures and is ideal for indoor/outdoor rental applications. It merges stable power delivery with high-speed, high-capacity data distribution, simplifying fixture deployment. The housing caters to rack-, truss- and wall-installation, for maximum deployment flexibility.To ensure utmost flexibility for designers and integrators, it can be driven using industry standard protocols, including Art-Net and sACN as well as Martin’s award-winning P3 control protocol. It requires no local configuration or setup, enabling easy deployment and allowing power supplies to be located at significant distances from the lighting fixtures. It supports longer cables, more fixtures per daisy chain, and split branches. The built-in network switch eliminates the need for third-party switches, and power limiting control increases the number of fixtures per daisy-chain while implementing energy-saving measures.
The P3 PowerPort 500 IP Rental is a robust and reliable solution, as it protects all inputs and outputs against overload and surge conditions and built-in fail-safe bypass technology prevents single unit failures from disrupting the entire network. In addition, it is a single unit that provides data and power over a single cable to the fixtures. Furthermore, it features local status indication LEDs and a test button, eliminating the need for a person to be physically located at the controller or computer.
All P3 PowerPort-enabled Creative LED fixtures can be paired with the P3 PowerPort 500 IP Rental, even on the same daisy-chain.
特徴
Indoor/Outdoor power+data supply unit for rental Martin Creative LED fixturesIdeal for rental applications
Features 1 power+data output for connection of fixtures
Built-in network switch for easy daisy-chaining
Status LEDs providing real-time feedback
Local test button for easy diagnostics
Built-in power-control enables more fixtures per daisy-chain when full output is not needed
Built-in Hibernation mode enables energy-saving when system not in use
Compatible with Art-Net, sACN and Martin P3
Fitted with connectors for easy deployment
Can be truss-, rack- or wall-mounted
IP65 rated
仕様
Control and ProgrammingControl Protocols: P3, sACN, Art-Net and RDM over Art-Net
Protocol Detection: Automatic
Settings and Feedback: P3 or RDM over Art-Net
Unit identification: User-settable ID number
Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance: ANSI E1.31 - 2018
Martin P3 Compliance: P3 System Controller Software 6.1.0 or newer
Ethernet Transceiver IN: 100/1000Mbit (with fail-safe bypass to Ethernet THRU)
Ethernet Transceiver THRU: 100/1000Mbit (with fail-safe bypass to Ethernet IN)
Ethernet Transceiver OUT: 100Mbit
Firmware Update: via Ethernet using Martin Companion or P3 System Controller
Control/User Interface Frontpanel
Power Out Status: 1x Green LED
Ethernet Out Status: 1x Amber LED
Ethernet In/Thru Status 1-2: 2x Green+Amber LED
Device Status: 1x RGB LED
Device test and reset: Pushbutton to call up test patterns on fixtures connected to DCE output and reset device
Control/User Interface Backpanel
Fixtures Power Mode: DIP switch to force all connected fixtures in normal power, force all connected fixtures in half power or let controller decide (via P3 or RDM)
Frontpanel Disable: DIP switch to disable all (5) Status LEDs and the pushbutton on the frontpanel
Construction
Color: Matte Black
Housing Material: Aluminium
Protection Rating: IP 65
NEMA Enclosure Rating: Type 3
Corrosion Resistance: ISO 12944-6: 2018; C3 Medium, Test regime ISO 9227, 240h
Installation
Orientation: Any
Single Unit 19-inch Rackmount: Using supplied short and long rack mounting ears
Dual Unit 19-inch Rackmount: Using supplied coupling plates and short rack mounting ears
Wallmount: Using supplied short rack mounting ears
Trussmount Vertical: Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm
Trussmount Horizontal: Using halfcouplers in supplied short rack mounting ears
Location: indoor or temporary outdoor
Connections
Power In/Thru: Neutrik powerCON TRUE1 TOP
Ethernet In/Thru: 2x Neutrik etherCON TOP
DC Power and Network output: 1x chassis-mount DCE hybrid connector (7pin)
All connections hot plugging compatible
Output Ports
Quantity: 1
Power: 48 VDC / 10 A
Ethernet: 100Mbit (P3, sACN, Art-Net)
Electrical
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 2.7 A
Typical earth-leakage current: 0.53 mA
Power Factor: 0.99 @ 100 V / 120 V , 0.98 @ 208 V , 0.97 @ 230 V / 240 V
Max current draw: 5.5 A @ 100 V / 120 V , 3.0 A @ 208 V / 230 V / 240 V
Typical current draw: 5.3 A @ 100 V / 120 V , 2.6 A @ 208 V / 230 V / 240 V *
Power Consumption
Maximum: 500 W
Typical: 480 W *
Idle: 5 W *
Hibernation: 4 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: output at full capacity with all connected fixtures at full output white.
Idle: output at full capacity with all connected fixtures at zero output.
Hibernation: output disabled; wake-up procedure required to re-use fixtures.
Thermal
Cooling: Convection
Maximum Ambient Temperature (Ta max): 40° C
Minimum Ambient Temperature (Ta min): -30° C
Maximum Surface Temperature, steady state, at 40° C ambient: 65° C
Typical Heat Dissipation (calculated, +/- 10%): 106 BTU/hr.
Environmental
RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
FSC: Certified cardboard inlay and outer packaging
Approvals
Global CB Certification/IECEE: IEC 62368-1
EU safety: EN 62368-1
EU EMC: EN 55032, EN55035, EN 61000-3-2, EN 61000-3-3
US safety: UL 62368-1
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 62368-1
Canadian EMC: ICES-003 Class B
Australia/NZ: RCM
United Kingdom: UKCA
Compatible Fixtures
VDO Sceptron XB
Exterior Dot-1 Pro (via Exterior DC-Feeder)
Exterior Dot-4 Pro (via Exterior DC-Feeder)
Exterior Dot-9 Pro (via Exterior DC-Feeder)
Exterior Dot-HP Pro
Included Items
1x Multi-Language Safety & Installation Manual
1x Safety Cable Attachment Eyelet, incl. screws
2x Short Rack Mounting Ears (usable for rack-, wall- and clamp-mounting), incl. screws
1x Long Rack Mounting Ear (usable for rack-mounting), incl. screws
1x Coupling Plate (usable for rack-mounting), incl. screws
Related Items
P3 PowerPort 2000: P/N MAR-90721200
P3 PowerPort 500 IP Install: P/N MAR-90721202
DCE PSU 240 IP: P/N MAR-90721203
DCE DataSplitterBooster IP: P/N MAR-90721204
Martin Companion Firmware Upload, Addressing and Stand-Alone Programming Software: Free download from www.martin.com
P3-175 System Controller: P/N MAR-90721100
P3-275 System Controller: P/N MAR-90721101
P3-PC System Controller: Free download from www.martin.com
Accessories
AC Power Input Cables
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m P/N 91611797
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m P/N 91610173
AC Power Linking Cables
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m : P/N 91611796
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m : P/N 91610172
AC Power Connectors
Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU
Pre-Assembled Hybrid DCE Cables
DC + Ethernet Cable DCE-DCE 1m: P/N MAR-91700100
DC + Ethernet Cable DCE-DCE 2.5m: P/N MAR-91700101
DC + Ethernet Cable DCE-DCE 5m: P/N MAR-91700102
DC + Ethernet Cable DCE-DCE 10m: P/N MAR-91700103
DC + Ethernet Cable DCE-DCE 25m: P/N MAR-91700104
Bulk Hybrid DCE Cables
DC + Ethernet Cable 100m: P/N MAR-91700105
DC + Ethernet Cable LSZH 100m: P/N MAR-91700106
Field-Installable DCE Connectors
Field-installable Connector DCE Male: P/N MAR-91700107
Field-installable Connector DCE Female: P/N MAR-91700108
Closing Caps for DCE Connectors
Closing Cap Male DCE Connector: P/N MAR-91700109
Closing Cap Female DCE Connector: P/N MAR-91700110
Hybrid DCE Adapters
DC + Ethernet Adapter DCE Male-Male: P/N MAR-91700111
DC + Ethernet Adapter DCE Female-Female: P/N MAR-91700112
DC + Ethernet Adapter EtherCON+Wires to DCE: P/N MAR-91700113
DC + Ethernet Adapter DCE to EtherCON: P/N MAR-91700114
Rigging Accessories
Super Lightweight Half Coupler Rigging Clamp, black: P/N 91602018
G-clamp (suspension with unit hanging downwards only): P/N 91602003
Half-coupler Clamp: P/N 91602005
Quick Trigger Clamp (suspension with unit hanging downwards only): P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
Ordering Information
P3 PowerPort 500 IP Rental: P/N MAR-90721201
サイズ
Width: 217.0 mm (single or double unit 19” rack-mountable with included rackmount ears)Height: 44.45 mm(rackmount 1U)
Depth: 365.0 mm
Weight: 3.5 kg
■メーカーサイト
https://www.martin.com/en/products/p3-powerport-500-ip-rental