De Sisti SUPER LED F14 HP T（タングステン）

White light, either Tungsten or Daylight balanced

概要

GLASS FRESNEL LENS
De Sisti utilizes a true Fresnel lens made of high quality, shock resistant borosilicate glass. Plastics lenses may discolor over time negatively affecting both output and color temperature. Glass is consistent, resilient to heat and offers better uniformity in beam protection.

PATENTED OPTICS
Our internationally patented optical system optimizes the LED source. The reflector design in combination with a Fresnel lens gives us the highest optical efficiency in the industry. De Sisti is able to achieve similar outputs to our competitors with half the power requirements. Our Super LED Fresnels produce the exact light you’ve come to expect from a traditional Fresnel.

SILENT OPERATION, WITH THE RIGHT TEMPERATURE
We use Self Stabilizing Silent Active Cooling technology. The speed of the fan is managed by an internal thermal sensor and CPU, automatically adjusting the temperature of the LED Array to 65°. The hydro dynamic bearing fan operates silently with a very low RPM. A unit must always be silent when it operates, not only with the fans switched off.

UNIVERSAL PSU
De Sisti Super LED Fresnel are ready to use around the world
with auto sensing power supplies accepting voltages from 90-250 volts.

HIGH COLOR QUALITY OF LIGHT
You can expect the highest color quality from the De Sisti Super LED Fresnels with CRI & TLCI values above 95 throughout the rsnge. The result ensure maximum compatibiity of the light emitted by the devices with optical cameras that have no need for further adjustments,

特徴

Continuous light output at any dimming level. Flicker free up to 40,000 fps. We power our LED array via DC Current rather than PWM technology used by our competitors
DC current rather than PWM technology used by our competitors
Same characteristics as a traditional Fresnel: single shadows, spot/flood focus range and exceptional barndoor control
CRI and TLCI greater than 96 with no shift in color temperature when dimming
High efficiency self stabilizing silent active cooling: Automatic, thermal stabilization of the LED operating temperature is managed by an internal thermal sensor and CPU, variable speed fans and heat sink to maintain the LED Array’s constant temperature at a maximum of 65°C / 149°F. The hydro dynamic bearing fan operates silently with a very low RPM
Interchangeable accessories with our conventional range of Tungsten and HMI Fresnels
All De Sisti Fresnel Series utilize a ne w Universal Voltage and “Power Factor Corrected”
Power Supply (PF=0.96)

仕様

DESCRIPTION VALUE
Power to LED 580W
DC Current to the LED (no flicker)
Rated Voltage & PFC 90-250V 50-60Hz PFC 0,96
Power Consumption Europe: 650W @ 230 V 50-60 Hz
America: 650W @ 120 V 50-60 Hz
Power Connection powerCON IN & OUT
DMX Data linkUSITT DMX512-A 5-pin XLR for DMX in & out.Use shielded data cables.Do not overload the daisy chain. Up to a maximum of 32 devices can be used on a single DMX chain
DMX Channels 1 at 8bit: Dimmer
2 at 16bit: Dimmer
LED ARRAY Lifetime 50.000 hours with 70% Lumen Maintenance. The LED ARRAYS are tested and certified up to LM80
CCT T: 3.200°K
CRI / TLCI T: 97 / 96
Protection Type IP 22

サイズ

Weight of Fixture M.O. 20 kg.
P.O. 21,5 kg.
Max. Housing Surface
Temperature 70° C
Weight of color frame 0,50 kg.
Barndoor ring diameter Seat: 402mm
Accessory: 399mm
Size of scrims & color frame Seat Diameter: 395 mm.
Accessory Diameter: 393mm
Lens diameter 350mm

※「M.O.」「P.O.」の違い／フォーカス棒での調整が可、不可で分かれています。各モデルについて、詳しくはお問い合わせください。

参照

■メーカーサイト
https://www.desisti.it/super-led-f14/