ENTTEC SMART PXL Power Injector 24V（スマートピクセル パワーインジェクター 24V） [73019]

Inject power to your Smart PXL system to increase the number of Dots per string.

Use the Power injector to get the most value from your Smart PXL Dot system by to combating the effect of voltage drop and increasing the number of Dots that can be connected to each controller’s data output.
By adding more injectors and power supplies you can keep on extending until you reach the data limit of your system.
For specification information for custom pixel pitches, see the Smart PXL installation guide or speak to a member of ENTTEC’s technical sales team.

概要

Inject up to 10A of power to extend the number of dots that can be connected to each pixel controller.
Voltage transient protection on the VCC and Data+ lines.
Reverse polarity protection.
Compatible with ENTTEC Smart PXL Dots.
1* IP67 Female Amphenol AT Series connectors with industrial grade heat shrink for added rigidity.
2* IP67 Male Amphenol AT Series connectors with industrial grade heat shrink for added rigidity.

仕様

IP rating　IP67
Wire Gauge　16AWG V+ and V20AWG data
Resistance　0.02Ω
Minimum cable bend radius　80.88mm
Voltage 24V / 48V (see PN)
Max rated current. 10A
Max power dissipated 1W
Environmental operating temperature -20°C to 50°C
Body material　Plastic
Conductor Material　Tinned copper
Mounting Hole Diameter　4.5mm　Dia
Unit dimensions (mm)　70*51.5*22mm
Unit weight　0.14Kg
Packaging dimensions　160*140*40mm
Shipping weight (Kg)　0.20Kg

参照