ETC Source 4WRD II PARNel Fixture Body（ソースフォワード II パーネル）ボディー付き 5900k CRI90+

販売価格はお問い合わせください。

返品特約に関する重要事項

商品詳細

特徴

For over 25 years, Source Four has been synonymous with theatrical lighting. Keep those fixtures but move 4WRD with the high output but perfectly nuanced LED lighting of the Source 4WRD II.

With a full family of options available, you can retrofit existing Source Four incandescent fixtures, or add to your inventory knowing that you’re gaining some of the best white-light LED technology on the market. You’ll never change another lamp.

仕様

Source
LED details S4WRD II LED *Not Included*
Max lumens 11,584 (PAR), 10,786 (PARNel) w/ S4WRD II
Lumens per watt 77 (PAR), 72 (PARNel)
L70 rating (hours to 70% output) >45,000 hours (LM84 test pending)
Notes
S4WRD II LED sold separately

Color
Colors used Warm or Cool White
Color temperature range 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
Calibrated array NA
Red shift No
Notes
S4WRD is available in 80+ CRI (Standard) and 90+
CRI (Gallery) - See S4WRD datasheet for details

Optical
Beam angle range
PAR: 10–36°
PARNel: 13–30°
Gate size N/A
Aperture size 178 mm (7 in)
Pattern projection No
Pattern size N/A
Camera flicker control/Hz range No
Notes
PAR ships with an AR coated flat lens. Additional
PAR lenses sold separately. PARNel ships with
PARNel lenses.

Control
Input method Line Voltage with DMX Control or Line Dimmed
Protocols DMX via RJ45 connector
Modes (Footprint) 1
RDM configuration Yes
UI type 7-segment address display
Local control Yes
Onboard presets No
Onboard sequences No
Onboard effects No
Fixture to fixture control No
Notes Local level control via UI

Electrical
Voltage range
114–125 V, 60 Hz (120 VAC)
209–252 V, 50 Hz (230 VAC)
Input method
Hard wired, 1 m cord, Edison plug (120 VAC)
Hard wired, 1 m cord, bare end (230 VAC)
Inrush
30 A (first half-cycle) at 120 VAC
12 A (first half-cycle) at 230 VAC
Fixtures per circuit*
120 VAC: 14 fixures per 20 A switched circuit (R20 module or similar)
230 VAC: 6 fixtures per non-dimmed circuit (ER15AFR module)
Wattage (Typical/Standby)
150 W / 1.2 W (120 VAC)
175 W / 3.7 W (230 VAC)
Current draw
1.26 A at 120 VAC
0.75 A at 230 VAC
Notes
-When using line dimming, see the S4WRD manual for dimmer setup.
-When using line dimming, standby power is 0 W.
*All measurements are for 120 V, 60 Hz. Results may vary in different regions.

Thermal
Ambient operating temp 5°–50° C (41°–122° F)
Fan (controllable) Yes (no)
Droop compensation No
dB range 28 dBa (average at 1 m)
BTUs/hour
529 (120 VAC)
597 (230 VAC)

Physical
Materials Die-cast aluminum
Color options Black, white, silver or custom color
Mounting options Yoke
IP rating IP-20
Weight PAR: 3 kg (6.6 lb) / PARNel: 3.5 kg (7.7 lb)
Included accessories Color frame
Notes
Includes S4WRD mounting post. Requires the S4WRD II LED available separately

Warranty
Fixture Three years

Regulatory and Compliance
Approved regulatory standards
cULus
CE Compliant when used with ETC Source 4WRD
LED Retrofit